TECNOWARE UPS EXA PLUS 3000VA 2100W

Features & Benifits

Ideal for installation in quiet environments (the fan works only in Battery mode or when the AVR is active
Complete protection from black out, voltage surges (overvoltages and undervoltages), lightning (with surge arrester upstream), variations frequency, surge, harmonics, voltage distortions
Recommended for Workstation, PC Game, Personal Computer, Server, Local Area Networks (LAN)
Intelligent slot for SNMP or Dry Contact card
Line Interactive Plus technology Sinusoidal
AVR voltage stabilization electronic circuit
Battery recharging system managed by microprocessor
5 Year Warrenty Including batteries

Compare

Purchase this product now and earn 716 points! £596.67 Excl. VAT

Out of stock

Description

The Sump Pump UPS  by Tecnoware will kick in when the mains power fails & continue to provide stable power until the mains supply restores.

There are various sizes of UPS that can be used for sumps or pumps & below we have selected what we think are the most suitable for this type of application.

If you need:

  • backup power for sump pump
  • backup power for septic pump
  • ups for water pump

This is the Sump Pump UPS backup power unit you need, or if you prefer, you could look at other Sump Pump UPS backup power units by Powercool or Powerwalker

For further information, please feel free to contact us at 03333 051 037 or email sales@upscentre.co.uk

Product Description

The Tecnoware UPS EXA PLUS 3.000 – Power 3.000 VA PF 0.7. Line Interactive Plus Sinusoidal technology, Input / output 230 / 230Vac, 50 / 60Hz, 8 IEC C13 sockets, dimensions 14.5x22x45.5 cm, weight 19.7 Kg, autonomy 10-30 min. Multifunction graphic LCD display with Intelligent Backlighting System, EPO connector USB and RS232 communication ports for UPS control and on / off programming using the free TecnoManager software. SNMP or Dry Contact card is avaliable as an optional extra

Technical Information

Technical data

Code FGCEXAPL3002IEC
Nominal power 3.000 VA
Active power 2.100 W
Power factor 0,7
Technology Line Interactive with stabilizer
LCD Display UPS status, input/output voltage, input/output frequency, load level, battery capacity, warning or fault error code. (the display backlighting is normally off, switch on only after a key is pressed)
Cooling Fan cooling (only in battery mode, charging mode or boost/buck AVR mode)
Audible noise < 45 dBA to 1 m
Dimension UPS LxHxP 14,5x22x45,5 cm
Dimension (with packing) LxHxP 23×32,5×54 cm
Weight 19,7 Kg
Input
Number of phases 1Ph+N
Nominal voltage 208Vac/220Vac/230Vac/240Vac
Input voltage range 162-290Vac
Nominal frequency 50/60 Hz (selectable)
Output
Number of phases 1F+N
Nominal voltage 208Vac/220Vac/230Vac/240Vac (selectable)
Static voltage Regulation at %100 linear load (On-Line and battery mode) ±1,5%
Voltage THD at rated linear load <2% (linear load),, <5% (non-linear load)
Crest factor 3:1
Frequency 50/60 Hz (selectable)
Inverter waveform Sinewave
Overload capability < 130%
Transfer time 2 ms (typical)
Battery
Type Lead acid, sealed, maintenance free
Backup time (typical) 10-30 min
Estensioni autonomia
Environmental specification
Working temperature From 0 to 40 °C (recommended from 20 to 25 °C)
Humidity < 95% without condensation
Maximum altitude 3000 m
IP protection IP20
Certifications CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3)

Reviews

There are no reviews yet.

Be the first to review “TECNOWARE UPS EXA PLUS 3000VA 2100W”

Your email address will not be published. Required fields are marked *


Review and earn 50 points!

You may also like…

  • Powerwalker VFI 3000 VA (TG) (2700 Watt) UPS Centre

    Purchase this product now and earn 541 points! £451.17 Excl. VAT