TECNOWARE UPS EXA PLUS 3000VA 2100W
Features & Benifits
Ideal for installation in quiet environments (the fan works only in Battery mode or when the AVR is active
Complete protection from black out, voltage surges (overvoltages and undervoltages), lightning (with surge arrester upstream), variations frequency, surge, harmonics, voltage distortions
Recommended for Workstation, PC Game, Personal Computer, Server, Local Area Networks (LAN)
Intelligent slot for SNMP or Dry Contact card
Line Interactive Plus technology Sinusoidal
AVR voltage stabilization electronic circuit
Battery recharging system managed by microprocessor
5 Year Warrenty Including batteries
£596.67 Excl. VAT
Out of stock
Description
The Sump Pump UPSÂ by Tecnoware will kick in when the mains power fails & continue to provide stable power until the mains supply restores.
There are various sizes of UPS that can be used for sumps or pumps & below we have selected what we think are the most suitable for this type of application.
If you need:
- backup power for sump pump
- backup power for septic pump
- ups for water pump
This is the Sump Pump UPS backup power unit you need.
For further information, please feel free to contact us at 03300271309 or email sales@upscentre.co.uk
Product Description
Technical Information
Technical data
| Code | FGCEXAPL3002IEC |
| Nominal power | 3.000 VA |
| Active power | 2.100 W |
| Power factor | 0,7 |
| Technology | Line Interactive with stabilizer |
| LCD Display | UPS status, input/output voltage, input/output frequency, load level, battery capacity, warning or fault error code. (the display backlighting is normally off, switch on only after a key is pressed) |
| Cooling | Fan cooling (only in battery mode, charging mode or boost/buck AVR mode) |
| Audible noise | < 45 dBA to 1 m |
| Dimension UPS LxHxP | 14,5x22x45,5 cm |
| Dimension (with packing) LxHxP | 23×32,5×54 cm |
| Weight | 19,7 Kg |
| Input | |
| Number of phases | 1Ph+N |
| Nominal voltage | 208Vac/220Vac/230Vac/240Vac |
| Input voltage range | 162-290Vac |
| Nominal frequency | 50/60 Hz (selectable) |
| Output | |
| Number of phases | 1F+N |
| Nominal voltage | 208Vac/220Vac/230Vac/240Vac (selectable) |
| Static voltage Regulation at %100 linear load (On-Line and battery mode) | ±1,5% |
| Voltage THD at rated linear load | <2% (linear load),, <5% (non-linear load) |
| Crest factor | 3:1 |
| Frequency | 50/60 Hz (selectable) |
| Inverter waveform | Sinewave |
| Overload capability | < 130% |
| Transfer time | 2 ms (typical) |
| Battery | |
| Type | Lead acid, sealed, maintenance free |
| Backup time (typical) | 10-30 min |
| Estensioni autonomia | – |
| Environmental specification | |
| Working temperature | From 0 to 40 °C (recommended from 20 to 25 °C) |
| Humidity | < 95% without condensation |
| Maximum altitude | 3000 m |
| IP protection | IP20 |
| Certifications | CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3) |
Reviews
There are no reviews yet.